belt speed
英 [belt spiːd]
美 [belt spiːd]
网络 砂带速度; 带速; 皮带速度; 输出带速度; 履带速度
双语例句
- Adopt double mesh belt ( spiral net belt conveyor food, on the net) with variable frequency speed regulation, the user can according to the different Fried food to adjust mesh belt transmission speed.
采用双网带（螺旋网带）输送食品，上下网带可变频调速，用户可根据所炸食品的不同来调节网带的传输速度。 - Something, such as a vehicle, structure, or sandwich, that has two decks, floors, or layers. Research on a New Method to Calculate the Belt Speed in Dual-channel Electronic Belt Weigher
双层的带有双层的东西，如双层甲板或客舱的车船，双层地板的结构或双层的三明治双通道电子皮带秤速度新算法的研究 - Wrinkle conveyor belt speed and main machine speed are Synchronous.
皱纹输送皮带、和主机速度同部连线。 - Design and Application of Belt Speed Detected System of Belt Conveyors
带式输送机带速检测系统的设计应用 - Research on a New Method to Calculate the Belt Speed in Dual-channel Electronic Belt Weigher
双通道电子皮带秤速度新算法的研究 - Poster speed and conveyer belt speed transfer speed in step, can is it stick to standard exactness and poster quality to guarantee.
贴标速度与输送带速度同步调速，可确保贴标准确度及贴标品质。 - It measures the belt loading and belt speed and calculates the material flowrate which it controls by varying the belt speed.
本仪表通过测量皮带载荷及皮带速度来计量物料的瞬时流量，并通过控制皮带速度来调节瞬时流量。 - The influences of abrasive grain size, belt speed, contact roller's hardness, grinding depth and grinding feeding speed on surface roughness were discussed.
讨论了砂带粒度、砂带线速度、接触轮硬度、磨削深度和磨削进给速度对表面粗糙度的影响规律。 - Various levels of the belt speed and purging-gas flow rate were considered in the CFD simulation to evaluate their influence on stress formation inside the solid-state substrates.
在CFD的计算模拟中，将同时考虑不同覆带速度与通气速度对成形之陶瓷体所引发的热张力。 - Magnetic Clutch to adjust the belt speed for stable feeding and spacing between blanks.
采用变速器和磁性离合器调整送纸皮带速度，确保送纸及送纸步距的稳定。 - The conveyor belt speed can be adjusted using an electronic control.
传送带的速度由电子控制，可予以调节。 - The stress of the largest stress point is affected directly by the belt speed. But the stress also can seriously affect the service life of the belt in belt transmission.
带传动中，带速直接影响到带所能传递的能力和最大应力点处的应力值，而最大应力点处的应力又严重地影响到带的寿命。 - The more rapid the abrasive belt speed, the smaller the roughness.
砂带速度越高，粗糙度越小； - Study on the Epoxy Resin Self-Hardening Sand Grinding Force and Abrasive Belt Speed in Wire Conditioning
环氧树脂自硬砂的研究线材修磨的磨削压力与砂带速度 - Grinding Force and Abrasive Belt Speed in Wire Conditioning
线材修磨的磨削压力与砂带速度 - Reference data of sand belt speed for sand belt grinding of different materials workpieces are provided.
提供了不同材料工件用砂带磨光时砂带速度的参考数据。 - Optimum belt speed selection of triangle adhesive tape
三角形传送带最佳带速的选择 - Reasonable Belt Speed Selection of Classical V-belt Drives
普通V带传动带速的合理选择 - Furthermore, the dynamics characteristics of belt conveyor in the condition of a changeless startup time and different belt speeds are analyzed, which the changing rule between dynamic characteristic of belt conveyor and belt speed in startup phase also is got.
同时，本文还对相同启动时间下的不同运行速度的带式输送机的动态特性进行了分析，得出了带式输送机的动态特性与运行速度之间的规律。 - In this paper, the analyses of optimization for selecting the belt belt speed are given in detail.
本文对带速的最佳条件选择作了较详细的分析。 - The software package consists of four parts: tread cut to length, cutting process, conveyor belt speed detection and touch screen combination mode.
系统软件分为胎面定长切割、切割过程、输送带速度检测和触摸屏组态4个部分。 - This paper describes the design of a high-speed belt conveyor. discusses the affection of belt speed on the energy consumption and running stability of the belt.
阐述了高速带式输送机的设计，带速对输送带的能量消耗和运转稳定性的影响。 - As the conveying load is increasing, the light single-motor power-driving belt conveying system is gradually replaced by large ones with long distance and high belt speed double-motor driving belt conveying system.
由于运量的加大，单电机拖动的小功率胶带运输系统已逐步被大运量、长距离、高带速的双电机拖动的胶带运输系统所取代。 - With the development of science and technology, the belt conveyor has been trend to longer distances, higher belt speed, larger volume.
随着科技的发展，带式输送机也在朝着更远距离，更高带速，更大运量的方向发展。 - It also established the single roller drive virtual prototype simulation experiment platform, and comparatively studied the starting and accelerating curve, minimum start time tension device control and the influence which the belt speed gave to the belt conveyor dynamic tension.
并建立了单滚筒驱动虚拟样机仿真试验平台，对比研究了起动加速曲线、最小起动时间、拉紧装置控制和带速对输送机动张力的影响。 - Tensioning devices is the necessary parts which can guarantee the normal operation of the belt conveyor, especially for the long distance, large-capacity belt speed, high large belt conveyor; it directly affects its dynamic characteristics of belt conveyor safe and reliable operation.
张紧装置是保证带式输送机正常运行的必要部件，尤其对于长距离、大运量、高带速的大型带式输送机来说，其动态特性直接影响着带式输送机安全可靠的运行。 - As belt conveyors are currently developing in the direction of long span, high power, high belt speed, high stability, the research on dynamic design and starting stability of belt conveyors has become a new subject.
当前带式输送机正朝着长跨度、大功率、高带速、高稳定性的方向发展，带式输送机的动态设计及启动稳定性研究已成为新的课题。 - With the long-distance, high belt speed, large capacity requirements, conveyor technology is becoming more and more rapidly. The higher mechanical and electrical equipment is demanding to protect their normal transport.
随着长距离、高带速、大运量的要求，输送机技术发展越来越迅速，这就对保障其正常运输的机电设备提出更高的要求。